x-valve leaking

[Chronobreak]

ok the UDM is having some problems. its leaking from somewhere isnide the gun/valve.

not lvlX and not out the back

i palced it udnerwater and it leaks out the ssides btwn valve and body and out the rail

possibly the on/off leaking but why...

could teh powertube part connected to the valve be leaking? and if so why

[Rift]

have you checked the regulator valve pin? is the reg body o-ring in good condition? i

[Chronobreak]

took EVERYTHING APART cleaned and re-oiled everything looked good/ok everything is enw the x-vavle si maybe a few weeks old with 2 cases through it. it worked fine before i got the enw anno and everything. it also sat for about 5 weeks.

[Chronobreak]

its also going full-auto...i want to play sudnay and little things like this scare me that theyl get worse etc not fun to play with a leaky gun and i want to show off the cool new mag not a cool new not working right leaky pos

[Chronobreak]

comone ao ers im playing tommorow i need some help....wheres tunaman when u need him?

[Tunaman]

Hold the trigger back while it's gassed up. Still leak?

[Chronobreak]

Hold the trigger back while it's gassed up. Still leak?

THERES my favorite tech yes but not as much

i tried a diff on/off at the shop as well and that one leaked about as much maybe abit more.
x-valve is about 2 months old and taken care of as well. i ahve a rebuild kit on the way but that doesnt really help me now.

[Chronobreak]

maybe if i say tunamans name three times he will show. tunaman, tunaman

any suggestions or things to checkout? ive pretty much checked everything out and it all elads back to the on/off but i dont think i recall an on/off leaking like this before

[Tunaman]

You need to change the tiny oring in the center of the on/off assy. That should do it. The pin will probably feel real loose sliding in there. Does it?

[Chronobreak]

You need to change the tiny oring in the center of the on/off assy. That should do it. The pin will probably feel real loose sliding in there. Does it?

yeah its pretty lose me oiling the crap out of it might not have helped. the original one turned like blackish i had a slightly used yellow one and it slowed the leak a bit.

thanks tunaman il try that first thing when i get the parts kit next week.

[Tunaman]

I have parts kits too if you need one. email me. :)

[Chronobreak]

ok tuna and others i got the parts kit today and replaced EVERY o-ring in teh on/off and re-oiled it still leaking about the same amt didnt seem to cahnge at all

[Tunaman]

Got any shims in the L10? Take them out.

[Chronobreak]

2 shims in lvlX removed them and tried again stil leaking the same

bolt seems to cycle and return fine

im stil also having a mad bounceaga problem like full-auto

[Sk8ermog]

You said you annoed it? Which parts did you have annoed? If you had the valve annoed then something might have happened then. Also are you dealing with a standard on/off for your x-valve or a ULT?