Tac-One bottom line question...

[DainBramage]

Sorry for the dumb question... I just got a tac one and I am wanting to run a bottom line on it. I am assuming I will have to run a line from the top of the front grip to the rear valve as well. Or can I just put a guage on the front grip and plug up the rear hole. I searched already and found nothing. Once again, sorry for the dumb question and sorry for the long post. Thanks in advance.

[Rift]

you can run the line directly from the valve to the bottom line, no need to add extra hoses unless ya want to ofcourse

[DainBramage]

I was wanting to run it from the bottom of the front grip to the tank.

[jrod]

Just look at pics posted on the forum. You can do the one hose from the drop to the valve. Or you can go from drop to the grip, and grip to the valve (that's the one I chose). It's all personal preference. I'm not sure that one is better than the other.

[Rift]

same thing just have the hose runing in a different way

[DainBramage]

thanks for the info

[Titansu]

Either way, the air has to get from the tank to the valve. Doesn't make a difference if you choose microline/macroline/braided hose.

Option 1) Tank to bottom of gas-through grip, through grip, out top of gas-through grip, to valve.



Option 2) Tank to valve.

[Mastema]

YEP only two ways.

Here is one on a TAc One

[Mosfet]

Technically, theres two more ways.
You can put a quick disconnect on the vale, and run a remote to it.

Or, you can run the hose from the valve to the bottom of the foregrip, then another from the top of the fore grip to the Bottom line.... but thats just silly. :P