Weird issues after installing ULT

[Starman33]

ok, i have a mag with those specs

MAG ULE CUSTOM
clamping feedneck
x-valve (lvl10 inside )
ultra light trigger (ult)
inteliframe
blade trigger
Dye gas true
C4 Dye sticky 2004
long speedy drop forward (black)
on/off asa

everything was great, i did just installed the ULT, I tried to mess with the shims, but im a total noob and when I touch the trigger ( without enought force to shoot ), it begin to leak and it only stop when i shoot again.

And now i chop A LOT ( even with the lvl10 ) when I walk the trigger, and I hear weird sounds like BIG leak and sometimes, the trigger dont reset itself and doesnt shoot at all..

Finally, sometimes, when i fire, the trigger reset when I am firing, and cause it to shoot 2 or 3 balls per trigger pull..

I am just confused...
please someone help me

( BTW, sry for my english )

[R.S.Y.]

it took me a bout four months of constant messing to set up my level 10.
im not really sure how i did it but it worked.

[vf-xx]

Need just a touch more information:

Tank type?
Number of shims in the ULT?

[Starman33]

I have a 68/3000 Crossfire

now i have 2 shim in my lvl 10, i tried without any and with 3, without success

and the ULT has 5 shims

[R.S.Y.]

i had a nitro duck 91/4500 tuffskin
i dont remember the number of shims in anything.

[Starman33]

oh, and i use a silver spring, ( the shortest i have )

[vf-xx]

the ULT has 5 shims

That sir is the problem.

Try it with 3 ULT shims.

The more shims you have the more reactive it is. However with your tank you cannot provide enough input PSI to keep up with the reactiveness. Hence the problems.

(I know because I was getting near FA with 5 shims and 900 psi input)

[Starman33]

ok, thanks, im gonna try this the soonest possible ( i emptied my tank messing with those shims )

Thanks again, if others people have an other suggestion, u are welcome


and, am I ok with the spring I use ( i want to get about 245FPS )