Leaking in Grip Frame

[I_R_NOOB]

I am experiencing a severe leak through my grip frame.... I htink it is coming from my on off but it looks fine.

[Chronobreak]

valve? and did you check the o-ring in the center of the on/off? thats where mine appear to be leaking(wel see when the parts kit arrives)

[Rift]

sometimes o-rings may apear fine but in fact are not. try fliping all the orings in your on/off sometimes this helps sometimes it dosent its worth a shot.

[athomas]

Leaking into the grip frame would indicate a bad o-ring on the lower part of the on/off assembly. It could be either the small inside or larger outside o-ring causing the problem.

[I_R_NOOB]

ummm

Well I changed them it out but it still leaks, I might as well just take it to my local proshop and cough up the ddough

[athomas]

Are you sure the leak is coming from the on/off and not the front of the valve? Are you using AGD o-rings. Aftermarket o-rings sometimes don't work that great.