Any one ever had any problems with 4.0 like the selonid not wanting to cycle or eratic and un dependible fireing, I am not talking about any full auto issues, i am aware but they are not present. it is acting like the selonid just doesent have enough power to cycle, and yes full battery. Let me know what you think.
-
- Gold PTP E-mag micro 1 of 24 +/- w/Pewter X-valve
- E-valved micromag
- Warped Sportz Lucky Kit
- Flatline 68/3000
- Oh yea don't forget 4.0
- 2K4 A-bomb
- Function Trigger and Bolt,Hybrid LPR, Volumizer, Ram and barbs
-
Problem: When turned on or when not fired for a length of time, the marker will not fire in E-Mode or Hybrid mode (though the solenoid audibly "clicks" when the HES is activated). Happens on full charge, partial charge and low charge.
Solution: The sear must be manually engaged in hybrid mode and then the marker preforms normally. Can sometimes be resolved by turning the board on/off or degassing the marker.
Alternative Solution: Leave the makrer off between games or when not in use. When on, fire a shot every 20 sec or so to "keep the trigger hot"
Yeah I have been dinking with this issue since 4.0 I purchased a new battery thinking that might be the cause and while it does happen less frequently, it does still happen. Occurse in 4.01 for me as well. But it's still mine!! ALL MINE!!!! (even if everyone with 4.01 has MY SPECIAL STARTUP SCREEN! -
4.0
Alomst describes the problem, it will just stop after fireing off a verry inconsistint string and will just start to do the clicky thingy, I will try that, I alos suspect posible on/off pin issues, what is your opinion z-man
- Gold PTP E-mag micro 1 of 24 +/- w/Pewter X-valve
- E-valved micromag
- Warped Sportz Lucky Kit
- Flatline 68/3000
- Oh yea don't forget 4.0
- 2K4 A-bomb
- Function Trigger and Bolt,Hybrid LPR, Volumizer, Ram and barbs
Comment
Comment