hyperframe trouble helppppppp

[paintslinger]

hey i just got a hyperframe and i installed everything but when i fire the soleniod just hits my sear and bounces off and no fire. how do i fix that? thanks

[kilaueakid]

did you put in the on/off that centerflag included?

Check to make sure it is on the highest power setting. Do this by holding both buttons down on the back of the grip frame for a few seconds. I believe the highest setting is 9. Try that.
kila

[paintslinger]

yea i got the yper on/off and i did turn it up to nine and stil got the same thing

[[NA]WARLORD]

Try another battery, and make sure you have a full tank, dont recommend c02 with this set-up as you will go thru many internall o-rings as well as freeze the valve..., i watch and laugh at my buddy when he does this, then sits back and says "Hey, somethings wrong with my Mini again, DOH".....

[paintslinger]

yea when it first didn't work i put in a new bat im not runnin c02 but i dont have a full tank of n2 just about 1800psi.

[[NA]WARLORD]

have you tried the adjustment on the solenoid yet, its 4 lil screws, give that a whirl....

[paintslinger]

been there tried that

[paintslinger]

i donno i just did something and it worked for a short period of time. i donno what i did but it just started working and it was awsome but then it stopped it seems like that lil backplate thing at the back has to be pushed out to work everytime? and when it doesn't shot i gues that back plate doesn't pop out

[paintslinger]

k i fixed it i just need to scoot the solenoid up way close and clamp it down real fudging tight almost broke the screw but anyway now its eating my bolt but all i need to do is get the longer on/off pin right? heck as long as i know it works who needs a bolt anyway?