X mag is broken, help me fix it, please.

[ebladeboi123]

Ok, i got my x mag, and i was excited, i charge it fully and everything. So, i go to air it up. It decides it wants to leak out the tip of the bolt and be in the forward position. So, how would one go about fixing this?

Set up....

High pressure tank
X mag, fully charged
X mag is in "e" position
x mag is indeed turned on

any insights would be nice

[Joni]

Put it in manual, hold the trigger down.

Does it still leak?

[kevdupuis]

First, it sounds like bolt stick. Take a squeegee and push the bolt back, put a few drops of lube in the asa air it back up and cycle it about 20 times to lube the marker. If it still keeps sticking go to your lvl 10 kit and try the next heavier spring, though I suspect the bolt o-ring is dry.

[ebladeboi123]

k, i held it in mech mode, it doesnt leak, but now it doesnt shoot either.... I have the eyes off, and in mech mode, the gun is off. Any insights?

[Duzzy]

My old field owner had this problem with a mag once, the bolt was all the way forward and air was gushing out, well his problem was that he had taken the sear out and forgotten to put it back in, so hopefully this isn't the case with yours, but check out the sear and make sure that a) you have one, and b) it isn't damaged.

[athomas]

If the level 10 setup is correct, then turn up the velocity until the gun will fire.

[AGDlover]

send it to tunaman have him tune it up +he'll look over any other thing you don't know about