is there any way to fix the side to side slop in thwe emag trigger? like shims or something? for refrence i have a newer fireblade trigger....
-
personally, i dont use them, but i do know that you can use small shims to take the slop out. bascially like really thin washers are what is need between the trigger and the frame.
--mikePresident Of the UW-Madison Badger Ballers
AO Feedback
1 of 35 SFL Emags VV02746
Silver Karta/Logic RT Winner:GOTM Most Bling for December VV04971
Sydarm SY00715
Nelspot (under restoration)
-
from BlackVCG's thread (weird, his picture is above right now too)
To the left of the magnet you see the trigger and the pivot pin. I use some 1/8" ID X 3/16" OD X .004" Thick shims that you can get from MSCDirect.com to take out all side to side play in the trigger. I keep the pivot well oiled with KC Trouble Free oil and it is very smooth and not squeaky like most triggers.
PBN Feedback AO Feedback eBay Feedback
DIRTY ROTTEN SCOUNDRELS (Rob Kenny and Matt Bradley) LIVE @ www.djinnuendo.com TUES 2/8 - 8 to 10PMComment
-
-
Putting some teflon tape between the trigger and frame might help as well (never done it to a mag, just other marker)Comment
Comment