Glueing a Foamy back on a Level X?

[Cilio - Knightmare Tango]

I tried using super glue and it came back off after about 30 shots. Any suggestions for glueing a foamy onto a Level X bolt? Thanks for any input, much appreciated.

[MonsterMag]

supe glue works , how long di you give it to dry?

[Cilio - Knightmare Tango]

It was about 24 hrs... glued it last night and just tried it about 1 1/2 hrs ago when I got back from work. I guess I'll try the Crazy glue again with a different foamy.

[CaliMagFan]

clean the tip of the bolt off with alcohol or anything else that is a solvent for paintball lubricant oils.... you might have a little bit of that oil under the glue, and oils and glue dont mix... or work...

-kyro

[Cilio - Knightmare Tango]

Seond time worked. Thank you both for taking the time out to give some advice, much appreciated

[White_Noise]

better solution than super glue would be rubber cement or other rubberized glue. they are more elastic and will hold up better than the super glue.

[LudavicoSoldier]

CA works best. Cryanoacrilate that is! SUPER super glue. Should be able to pick some up at your local hobby shop.

[Tunaman]

I have been using Elmers Ultimate Glue. Its a Polyurethane glue that is better than any glue I have ever come asross in one part form. 24 hr cure. Dont skimp on this. It will glue anything. Make sure to scratch up the surface of the bolt with a carbide scribe or the likes...you need to have something for the glue to grab on to.

[Cilio - Knightmare Tango]

2 1/2 cases through it this weekend and no problems