spacer kit ques.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • gizmolax13
    Registered User
    • Nov 2001
    • 812
    #1

    spacer kit ques.

    does the o-ring u get in the spacer kit the one on the power tube tip the part that unscrews or the one under the spacer??
    also....what is bolt stick?
    is it when you pull the trigger back when gassed up and it doesn't fire???
    cuz here's the problem....
    if that IS bolt stick i have a .235 in it now and i still have bolt stick....
    no leaking but it won't fire at all.....what do i do?!?!?!
    Last edited by gizmolax13; 01-04-2002, 02:14 PM.
    Tags: None
    • azheat99
      But it's a dry heat....
      • Nov 2001
      • 73
      #2
      The o-ring should replace the one behind the spacer. If it is placed on the brass tip, it will not fasten securely and loosen up while playing. Yep, made that mistake once and talked to the AGD techs. Bolt stick is exactly what it sounds like. Drop down to the next smaller spacer and try again. You can keep going smaller but if you get leaking down the barrel, replace the spacer with the next size larger.
      azheat Feedback
      The Grey List of trading profiles

        Comment

        • gizmolax13
          Registered User
          • Nov 2001
          • 812
          #3
          wait...on the package it sez go lower if their is a leak and higher if there is bolt stick....

            Comment

            • azheat99
              But it's a dry heat....
              • Nov 2001
              • 73
              #4
              Sorry,trying to do too many things at once and mixed it up. What the package says is correct. I would probably start with the 0.225 spacer and work from there. If your gun is not firing or gassing up, it sounds like a problem with delivery of gas to the gun. Is the CO2/air full? Is a line blocked? Velocity may be set too low (clockwise increases velocity). Make sure bolt isn't stuck forward. Strip and clean valve. Obviously, never work on it when your gas is hooked up.
              azheat Feedback
              The Grey List of trading profiles

                Comment

                • gizmolax13
                  Registered User
                  • Nov 2001
                  • 812
                  #5
                  ok well
                  bolt isn't stuck forward it doesn't move at all
                  the air gets there and pushed the pin forward into the trigger
                  i've tried every spacer in the kit and nothin happens....u pull the trigger the bolt doesn't go anywhere
                  it's like the sear doesn't let the bolt go...
                  i got this used so i don't know is the trigger pin was played w/ but i was told it wasn't...i have an extra one that was messed around w/ but that doesn' work either
                  i'm bringing it to m proshop on monday.....i'll have them fix it

                    Comment

                    Previous template Next
                    Working...