Need a quick answer.......

[Magz_rule]

Ok, heres the deal. Ive got 2 valves, 1 has a ULT on/off, the other has an emag on/off and pin. I need to put the ULT in the valve with the emag on/off and the emag on/off in the valve with the ULT. Question is, what EXACTLY do i need to switch? And how do i do so? Thanks, and any help would be appreciated. Thanks!

[Magz_rule]

Anyone? Do i just switch the brass on/off piece and the pin? Or is there other things to switch?

[VFX_Fenix]

The entire On/Off assy. The ULT comes with it's own pin which is a little different than an RT pin.

[Magz_rule]

The whole on/off assembly is what? Thats what i need

[VFX_Fenix]

The ULT On/Off consists of two brass pieces that screw together, the shims that space the two brass pieces, several orings that are inside the brass pieces, and a pin that travels through the center of the two brass pieces.

This is what the Stock On/Off looks like.

[Magz_rule]

Ok, i took the ULT assembly out, and the emag assembly out. I can almost switch them, EXCEPT when i took the emag on/off assembly out, the o ring is stuck in there, how can i get it out?

[Magz_rule]

Nevermind, got it out with an allen key and switched everything. Thanks for the help!!!