Strange Twist-lok Problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • abarnhar
    Hmm... battle grips
    • Apr 2003
    • 603
    #1

    Strange Twist-lok Problem

    I have two barrels: CP 12", Armson Stealth 16". The CP twists into place without too much hassle. The Armson will go all the way into the body, but will not twist to either side (yes, it's a RF/LF barrel). I can get it to twist if I unscrew the body a bit... but that's kind a hassle.

    Any thoughts?

    Thanks in advance!
    CPPA #1240


    My Trader Feedback
    PBReview Feedback
    AO Feedback
    Tags: None
    • Old_School_RT
      Old School RT's Rock!!!!!!
      • Oct 2004
      • 58
      #2
      Have you tried to loosen the barrel detent? If you take the trigger frame off you can access the bottom of the detent. there will be a small allen-head screw in the bottom. un screw it a couple of turns. That should help a llitle also try putting some gun lube on the O-rings of the barrel. that also helps a little
      -Automag RT SN - RT02713
      -Level 10
      -Modified On/Off Assembly With Short Pin
      -View Loader Evolution II Hopper With Z-board
      -14" Warpig Straight Bore Rifled Barrel
      -Soon to be added Hyper Frame with a custom Trigger from Doc.
      -Kapp Drop Forward With Cradle Mount
      -Flatline SN - FL03439
      -114 ci 3000 psi Tank
      __________________________________________________ ________

      Now you see. . . that evil will always triumph. . . .because good is dumb.
      Spaceballs

        Comment

        • abarnhar
          Hmm... battle grips
          • Apr 2003
          • 603
          #3
          You just got elevated to hero status. Amazing, owned a mag for a few years and never had tinkered with that twist-lock nub. Lossened it up and everything was great.

          Thanks!
          CPPA #1240


          My Trader Feedback
          PBReview Feedback
          AO Feedback

            Comment

            • Old_School_RT
              Old School RT's Rock!!!!!!
              • Oct 2004
              • 58
              #4
              Anything to help out a fellow 'mag owner.
              -Automag RT SN - RT02713
              -Level 10
              -Modified On/Off Assembly With Short Pin
              -View Loader Evolution II Hopper With Z-board
              -14" Warpig Straight Bore Rifled Barrel
              -Soon to be added Hyper Frame with a custom Trigger from Doc.
              -Kapp Drop Forward With Cradle Mount
              -Flatline SN - FL03439
              -114 ci 3000 psi Tank
              __________________________________________________ ________

              Now you see. . . that evil will always triumph. . . .because good is dumb.
              Spaceballs

                Comment

                • CaliMagFan
                  #5
                  looks like problem solved... but for future refference, watch that front frame screw.. if its too long it will protrude in the the classic style bodies and prevent teh barrels from working right..

                  -kyro

                    Comment

                    Previous template Next
                    Working...