Sear question?

[saml604]

I bought a used mag a little while ago. I noticed that the sear rod was touching the back of the trigger, so i adjusted it a little to get it to what looked right from what I had seen and heard. Then I read stories about trigger rod modification causing bolt and sear wear. I thought that maybe the previous owner had messed with it a little, so no big deal i thought, i'll just get a new sear. Ordered a brand new one, and now this one touches the back of the trigger. Retro's are supposed to be .750 i believe, but i have no way of measuring it accurately. I have a retro valve, intelli, and classic rail by the way. So, which one do I use?

[i_baked_cookies]

theres like a .000005% chance that the new one you ordered is the incorrect length, so i think ull be fine with that one.

[saml604]

yea I really doubt that it came adjusted wrong

[Tunaman]

It cannot touch the back of the trigger. Make it shorter.

[alooney11]

The distance between the sear rod and the back of the trigger should be the thickness of a credit card. Good luck.