ULT for minimag

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bmccoy03
    Go Go Gadget Mag
    • Nov 2004
    • 93

    #1

    ULT for minimag

    Hello out there. I was wondering if a ULT trigger would work on a minimag.
    The website says that its not recomended so i was wondering what the pros
    and cons are. If anyone knows just hit me up. Later Taters

    PS anyone know a source for good vertical feed barrels?
    Last edited by bmccoy03; 11-17-2004, 10:48 AM. Reason: spelling correction
    powrfeed automag body
    mini mag valve w/ lvl 10
    14" dye ultralite
    dead on d\f, asa
    ACI 68/3000
    12 vl revy

    and lots of paint

    AO Feedback
    Ebay Feedback
  • misenhei
    Registered User
    • Apr 2004
    • 57

    #2
    yes.....it will fit, and technically works. it also makes it painfully EASY to short-stroke. i would strongly recommend against it - save yourself the $40. it's also very easy to outshoot the valve with the trigger that light.

    Comment

    • autockr01
      Registered User
      • Sep 2004
      • 27

      #3
      Get it!

      I have a ULT in my minimag (w/ classic valve) and mine works pretty well. I suggest getting your ult from agd and ordering a pack of 6 Lx shims with it. The ult will come with like 5 ult shims, but you're going to need AT LEAST 11 ult shims in there for it to work reliably. Mine has the equivalent of 15 ult shims. NOTE: 1 Lx shim = 2 ULT shims. The trigger will be a lot lighter once you install the ult, and in turn is easier to short stroke, so it takes some getting used to. As far as out shooting the classic valve, it's not incredibly easy to out shoot. Oh yea, don't get this unless you have a Lx (level 10) bolt on your gun or else your minimag will turn into minichopper.

      Comment

      Working...