ult trigger problems

[mag88888]

the pin behind my trigger is pretty slow. it doesnt recharge fast or push back hard on trigger. i have four shims in the ult. and sometimes it makes a little chuff sound, thats if you dont let the pin all the way out. i havent heard of this on the forums but its bugging me and how can i stop it? i think i might be better off without the ult. i would appreciate any info or explanations. thanks. also why isnt my pin pushing hard at the trigger when i have 4 shims in it, ill try more.

[alooney11]

It might be that your tank isnt putting out enough pressure, i know that seems like bad news but that was my problem. I had a high pressure output tank supposedly 800 or whatever that was only putting out about 600 -650 check the real output pressure of your tank. I bought an apoc2k my gun shoots like a dream now. good luck

[mag88888]

can i get this checked where i fill up my tank? its a scuba store. also im gonna geta dynaflow or armageddon or apoc on the forum, so i cant wait until i get it. i hope it helps alot. thanks man.

[mag88888]

what tanks would you reccomend?

[mag88888]

but shouldnt my ult still be acting better than it is. i put 6 shims in it and it didnt runanway yet. but i dont know where i can get my out put tested.

[Hairball]

If you're just coming from an R/T on/off there might not really be anything wrong with it. The reason I say that is because the ULT just makes the trigger "softer" so the pull is lighter but it has less return force.

Food for thought

[mag88888]

i havent used the rt on/off.

[alooney11]

I can absolutely recommend an apoc2k, it is really great, i put my pressure up to about 850 when i got it...the gun was shooting like a different gun. Mind you when i got my rtulepro i used the same tank i used for my classic(no problems with the classic) a preset didnt work good with the rt, thats my experiece, recently i cranked it up to 1100-1200, put 6 shims in the ult and i can rapid fire, its quite fun..for me anyways! Check Z-Mans site,"Not all regs are created equal" he is absolutly right bout that.