level 10 problem

[mag88888]

my bolt has alot of stick to it, in strings of fire the bolt will stop and ill ahve to take off my hopper and reset the bolt. i have 2 shims in the level 10. also could this effect my ult and why it doesnt reset quickly and makes chuff noises. and the chuffs arent from the level 10 chuffing balls, the chuff is coming from the pin behind my trigger. please help.

[Rift]

firstly what is your input pressure set at and what velocity are you shooting at?

[mag88888]

i am using a nitroduck preset tank at 800 psi and i am using the middle spring for the level 10 kit, so about 270. oh, i forgot to say i have a barrel adapter that is partly off but it goes into my gun fine, its a little loose but doesnt wiggle. thats probably it cause i checked my detent and it was ok. i cant get the barrel adapter off though.

[alooney11]

When you reset the bolt do you push it back by hand? If so shoot your gun until you get bolt stick....dont reset it...get a key and tighten the field strip screw until it resets. Also make sure your grip frame screw is not too tight. Good luck