fore grip

[CaliMagFan]

radio shack is where i got the tubing for my hose... but they have the more plastic stuff for wires too..

[mag88888]

i still can not get the stupid screw off! would it work if i put it over the stove? how hot does it have to be?

[jamescell]

that would work. I removed mine easily enough but I'm pretty strong, I'll admit they were in there pretty tight. You will need to get longer screws because the stock ones will only tread in like a quarter of a thread. Also I drilled and counter sunk a second hole because the grip would turn with only one screw. Don't forget to locktite the new screws. ummm if you still can't get the screws out by your self, mabey a friend who is stronger could, or perhaps eat some spinage and get buff like popeye

[frop]

ummm if you still can't get the screws out by your self, mabey a friend who is stronger could, or perhaps eat some spinage and get buff like popeye

[mag88888]

did you heat the screws up to get them off? if you did with what and about how hot? thanks.

[Flow_Tech]

i ended up stripping out my screw for the ASA and having to dremel the top off,and then punching it out..then i replaced it with a ratchet hex head screw.....