Ball breakage

[Burb]

Can any one explain why i constantly get ball breaks?
I have a power feed mag, running a warp feed and an Armageddon air system.
I am using a standard 9v battery in my warp feed but am thinking of converting it either to a 12v, or buying the standard 10v battery.
I am using a boomstick (12")
Perhaps its because the balls arent feeding fast enough from the warp feed?
Please help!!

[HoppysMag]

under what conditions are they breaking? really fast fire? All shootin? metal or platic nubbins?

[DYE-BaLLeR]

are your breaking or chopping?with your setup, it sounds like your breaking becuase it would be hard to chop with a warp and a pf, what kinda paint and bolt are you using, hows the paint to barrel math?how cold duz it get up there?

[giblit]

hmmm this sounds like the same probablem i had with my mini mag when i just got a double triggr. the probablem with mine ad why i was breakin so much was the trigger pin was set right and i was short strokin constantly there for i was chopping a lot. that might be your probablem

[Cha0tic]

is your warp spinning right? somtimes you have to adjust your warp to spin a certain amount or you will chop like mad. try adjusting the dwell settings.

[talls]

Check the post "Proper Warp ball stack" in this forum. It is a classic that was posted by RobAGD. This could be the problem.

[Burb]

I am using the standard metal P Nubbins (because the plastic ones arent available in the UK)
I am also using my warp on the sensativity setting, as intelliframes arent available over here.


Bloody Americans using all AGD's stock!!!!!


The weather is cold, i was playing in snow yesterday and i was using "Diablo Blaze"

Thanks for the advice boys and girls.

[Thordic]

Two things:

1) P nubbins blow, get some V nubbins at least

2) Check your warp dwell jumpers. Too short a dwell can lead to really annoying breakage problems.

I'd bet on #2. It's happened to me, and 2 other people I know who use warps, at least. Possibly 4 other people, but I'm not sure.

[Omicron]

what?

What bolt are you using? so there's cold weather right? i would recommend a AGD Foamie bolt then, its supposed to be gentler, and softer on brittle balls.

[DYE-BaLLeR]

i kno your problem, THE PAINT!!!! diablo blaze SUCKS in cold wheather, do not use it for cold wheather!

[Burb]

Cheers guys, i have tried nearly everything on this post, all i need now is some decent paint before the first tourny this weekend!!

[DYE-BaLLeR]

good luck with your first, i had my first a few wks ago and had a bad time cuz i was using blaze

[HoppysMag]

Ya good luck and may your Mag serve you well.

[Burb]

Thanks mate, good new i have found that JCS (the people we get blaze from) are bringing along there heated truck so cold paint wont be a problem.