X-valve issues (leak)

[02vertcocker]

The setup is

Warp left body
Black x-valve with well working lvl 10 and ULT
Y-frame
Tac-one rail
Foregrip
Drop

Not that that is important, other than it has the ult, but the problem is, it will leak out the back of the x-valve, out of the silver screw on "cap".

I got 2 mags in a trade, and can't use this one with how much it is leaking. Though, if I take a couple of shots, it will clear up for a second/leak a little instead of severely, and then start either 5 or so seconds lat or after the next shot.

Thanks for helping someone that come over from an autococker, and has no idea what is going on.

~Nick

[Dayspring]

Turn down the velocity on the gun. If that doesn't work, you'll need to replace the reg piston. They are available from AGD or any of their dealers.

[02vertcocker]

Wow, I feel dumb

Care to explain how to turn down the velocity?

[Dayspring]

1/8" inch allen key. Insert it into the silver cap on the back of the xvalve. turn counter clockwise.

[02vertcocker]

Ahh, thanks for the fast replies.

[jamescell]

did you get it fixed? My ult sometimes doesn't seal until I fire it once. No biggy.