emag shooting horrible in e mode

[paintphreak01]

Alright, so i just got my emag back today, and it fired fine for the first 10-20 shots in emode. when i kept shooting, it slowly stopped shooting balls. I could hear the noid click still every time i pulled the trigger, but no air was being fed

I don't understand because it was firing absolutely fine before!
I have a tourney this sunday and i need immediate help!

-Andrew

[xballfan780]

how many fps ? and do you have lx?

[paintphreak01]

Not sure on the fps. I can adjust it up and down without a problem. Yes, a lvlx, no jams, pinches or chuffs involved

[xballfan780]

k , turn up your volicty and then try it , if no worky turn it down a bit

[paintphreak01]

yeah, i did, and still same thing. I think it has to do with the internals

[xballfan780]

Well my emag kind did that , it shot 1-2 nice shots then the rest rolled out the barrel , my teammate adjusted the lx and it worked great , try the lx

[paintphreak01]

the rest arent even rolling out of the barrel. No air is being supplied to the gun?

[desslock]

try the gun in mech mode. If it fires fine then you can rule out velocity, lvl10 adjustments, and on/off assembly problems. If the battery is fully charged then ur noid might be on its last leg. How old is this emag? My emag was having erratic problems while in e mode, took it apart and found out that the noid is not tripping properly, its a part that can wear out. $40 brand new from AGD.

[Muzikman]

Check to make sure the board is grounded good. Take the grip off and look at the board. In the center towards the bottom there is a small screw. Make sure it's tight.

Also make sure the trigger isn't adjusted too short.

[xballfan780]

no its not the board or anything because they are working , the niod is working. Its gotta be the lx

[paintphreak01]

Well, i came to the assumption that it was the battery not being fully charged. It was pretty low at the time. I charged it all day today, and it works without a problem WHICH brings me to my next problem. Whenever i charge the battery, the light stays red for about 5 minuets and then turns green. even when the battery has nothing left in it whatsoever.

Anything?

[White_Noise]

ive had the same problem, but if i unplug the adapter and plug it in again it works fine

[paintphreak01]

ahhh yet again, another problem. I think im cursed

So i was tuning my lvl x and my valve is stuck. i took out the screw, and i can only turn it so far, but it wont come out. I think i might have to take off the body?

edit: your from kenosha too?

[xballfan780]

turn the elcertonics on and pull the trigger , the on/off pin is down , pulling the trigger will push it up

[paintphreak01]

i love you dearly, xballfan

why didnt i ever think of that?