Hey guys, dunno if im doin something wrong but my xvalve only gasses up when i use the shortest spring, if i use any other spring the gun wont shoot. i'm prolly just missing something but im kinda confuzzled here. thanks :)
-
-
Try turning the velocity up also whats your input pressure at?
-
Make sure your both your frame screws are not over tightened, loosen them up then regas your gun, I can't tell you how important this is. Overtighten and you will not shoot.
:headbang: If you don't eat pink tacos your friends will!!!!
Xmag CNC Pewter VV04837Comment
-
Level 10 for Dummys
~Springs~
Shortest spring 250 - 280fps (maybe a little higher but thats rare).
Red Spring 270 -300fps
gray 275 - 310fps
~Oil~
Put oil in 3 places... 2-3 drops in the macro fiiting or QD on the valve, 2-3 down the power tube, 1-2 on the on/off assembley
~Leaks~
If it leaks "down the Barrel" , then the carrier oring has gotten too worn, go down one size in the carrier.
Or
There could be too many shims (rare), but does happen. Remove shims if carrier is nice and tight. You see the shims adjust when the bolt will start to vent.
Different Spring
OilComment
Comment