help with valve

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • master_alexander
    im a gun pimp :D
    • Sep 2004
    • 2462
    #1

    help with valve

    ok so i just got my new tank that's a 68/30. i read my rt valve and it says rated at 3000 psi.

    I aired up my gun and it didn't work. My tank preswsure is about 2700 right now and i don't understand it. i pull the trigger and it's just a pull, no click, no shot.

    do i need to ajust the sear? or is it the tank?

    i'll keep screwing with it until if find out what's wrong.
    "Ah yes, I have one of the 32*rebels that I always take to big scenario games. It keeps the truck from rolling if I have to park on a hill." - automikey
    Tags: None
    • Bulldog
      Registered User
      • Jun 2001
      • 1374
      #2
      Turn up the velocity.

        Comment

        • deathstalker
          Fnord!
          • Jun 2002
          • 1115
          #3
          What's your tank's output?

          Need a new sig pic? Click here!

            Comment

            • master_alexander
              im a gun pimp :D
              • Sep 2004
              • 2462
              #4
              ooohhh, my tanks output is around 850 ish. i found the problem and got it working but it is now a blender. it shoots nice and then chop! and then when i clean it shoot, chop!

              is it the bolt or the velocity or the paint? the paint is old, it's all deformed and stuff and goes, i think it's zap put i donno.
              "Ah yes, I have one of the 32*rebels that I always take to big scenario games. It keeps the truck from rolling if I have to park on a hill." - automikey

                Comment

                • PAINTBALLNEWBIE
                  Je mange du poulet. mmmmm
                  • Mar 2004
                  • 2666
                  #5
                  breaking in chamber? lvl 7, maybe even lvl 10 if its that bad.? breaking in barrel, bore too small.?

                    Comment

                    • master_alexander
                      im a gun pimp :D
                      • Sep 2004
                      • 2462
                      #6
                      mabey it is the barrel, i'll check that one, otherwise i'm stumped
                      "Ah yes, I have one of the 32*rebels that I always take to big scenario games. It keeps the truck from rolling if I have to park on a hill." - automikey

                        Comment

                        • PAINTBALLNEWBIE
                          Je mange du poulet. mmmmm
                          • Mar 2004
                          • 2666
                          #7
                          well in the rt manual, it says do not use old paint or else it will chop like crazy..but that was with the lvl7

                            Comment

                            • jamescell
                              IBEW local 498
                              • Aug 2004
                              • 367
                              #8
                              how about using a faster hopper?
                              The best beverage ever! My feed back

                                Comment

                                • GodLovesUgly
                                  Registered User
                                  • Dec 2004
                                  • 74
                                  #9
                                  i know exactly what your problem is... seeing as i had the same one for a while.. your field strip screw is too tight causing the valve to be crooked and your bolt is catching on either the sear or the body itself... just unscrew it a lil and see if that works... fixed mine right up
                                  VIVA LA TOM!!! :shooting: :cheers:

                                    Comment

                                    • CaliMagFan
                                      #10
                                      Originally posted by GodLovesUgly
                                      i know exactly what your problem is... seeing as i had the same one for a while.. your field strip screw is too tight causing the valve to be crooked and your bolt is catching on either the sear or the body itself... just unscrew it a lil and see if that works... fixed mine right up

                                      that makes balls chop?.... or the marker not shoot?.... i'd think its the latter, but he's figured that one out to this point....

                                      to alexander--- are the breaks beacuse of chops or barrel breaks?.... you can normally tell one from the other if there is paint on the bolt tip or not..... barrel breaks will leave teh first inch or 2 of the barrel clean, then there is a lot of paint downpipe..... if you have paint on the bolt and/or up into the feed neck then you can bet its chops....

                                      barrel breaks are because you're not matching your paint to barrel ID and/or crap paint....

                                      chops are sometimes because you have bad paint, but more often, its slow loading/ untuned LVL 10.


                                      good luck
                                      -kyro

                                        Comment

                                        Previous template Next
                                        Working...