OK brand new xvalve, one dot carrier and no shims. the gun doesnt seem to leak and the lvl 10 works but the gun cant be fired fast just one shot at a time. its a micromag, velocity is turned up very high stock on/off pin.. need some help
Cant rapid fire
Collapse
X
-
THOU SHALT NOT SHAVE YOUR ON/OFF PINOriginally posted by ViremI have a preset tank at 850 psi, dye throtle... i think the on/off pin needs to be shaved
If you have not read my pages on the subject I suggest you do it's quite helpful.
The only other rout you can go is to get the ULT and read up on how it can be adjusted. But dont go mesing with that on/off pin. you won't be able to "not" rapid-fire and then you'll have to buy a new pin.Comment
-
your title foold me. Yes I understand the PTP guns had to be tinkered with a little more to work.Originally posted by ViremI am not looking to rapid fire... its just that micromags on/off pins need to be diffrent sizes or the gun doesnt shoot....Comment
-
PTP micromag,,
I have had a lot of work with this subject, i have found that the best way to get yours in spec is to get a .750 and take it down a little at a time, like .002" per time or so, get your self a micrometer and this will be a lot easier, my micromag works great on a .750 a little bounce but not to bad. My micro E-mag is on sometihing like .684, i always am adjusting mine to see if i can get it optimal. The reason for these shananagins is the PTP bodies were hand anoed milled and taped so tolerences can be a little off. If you still have troubble with what you are trying to acomplsh post back and we can help you more. Basics of on/off higher knoledge is shorter is faster/more bounce, and longer is slower/no shooting.
Boyakasha,
Flossabe
- Gold PTP E-mag micro 1 of 24 +/- w/Pewter X-valve
- E-valved micromag
- Warped Sportz Lucky Kit
- Flatline 68/3000
- Oh yea don't forget 4.0
- 2K4 A-bomb
- Function Trigger and Bolt,Hybrid LPR, Volumizer, Ram and barbs
Comment


Comment