Intimidator help.

[Bonx0007]

My girly finally ordered the Intimidator. I am going to be setting it up. I want a nice simple setup. i am thinking about getting a crossfire 450 psi preset. and a gas through is that ok to do on these. Help please all advice is needed because I am doing this for the first time and I know nothing about timmys. Thanks alot guys and girls.

[ElementEclipse]

if you have a preset tank, you might wanna put a reg on it, or leave the gas through, and get an adjustable tank, just my opinion though.

[headcase]

Originally posted by ElementEclipse
if you have a preset tank, you might wanna put a reg on it, or leave the gas through, and get an adjustable tank, just my opinion though.

Notice he said a 450 preset.

I've never heard of anyone trying this set up, but I don't think you'll have any problems with it. Factory recommend input pressure is 500psi, with operating pressure somewhere between 200-300psi. So you should be fine.

In case you want to see the manual before you get the marker look at this:

http://www.countypaintball.com/IntimidatorManual.pdf

I don't remember if they are shipping with a hard copy of it or not, but that is the complete manual.

[ElementEclipse]

he said 450 psi, i think he meant to say 4500 psi, and from what i've been told, the crossfire presets run around 850, i may be wrong. In my opinion though, i think he should put a reg on it.

[Bonx0007]

No, I meant a 450 psi output pressure crossfire tank. Sorry that i wasn't specific enough.

[headcase]

Yes, crossfire and bulldog 2's both come in High and Low pressure presets about 850/450 respectivly.


Bonx0007 -- Like I said, you shouldn't have any problems with that set up.

[Bonx0007]

thx

[ElementEclipse]

ok, i was wrong, thank you for correcting me.

[Bonx0007]

More advice always wanted. Maybe something I should know about Drop forwards or anything???

[covadsucks]

Get a Palmer Stabilizer as it will control the velocity easier...turn up the Stabe's pressure, you increase velocity slowly. I run with my bro's Timmy a lot and I keep the operating pressure at 80-85 psi. It'll chrono at 280fps no sweat. I would highly recommend the reg over a gas through...but it's your choice in the end.
As for the Drop, I also would have to go with a Drop Zone by Kapp, or a Fullsize Shocktech. Just my $.02

[MajorDamage]

Well about dropforwards, just get what kind you like . Some people like a little drop, others like a HUGE drop. Its how you like it. Although you can't go wrong with an adjustable dropforward that way you can change it to how you like. The Warped Sports dropforward is great because it comes with a short arm and a long arm that way you can adjust it anyway you want, and if you want it short you won't have a big peice of extra metal stick sticking out . Its like the DropZone2 and the DropZoneStubby in the same package, for cheaper.

ENDO!

[Bonx0007]

How do I adjust the velocity on this Thing??????

[covadsucks]

Are you running only a gas through grip?

[Bonx0007]

No actually we set it up with a black magic reg and a X 45 4500 psi preset tank. I also need to Know how to disable the eye. No tools came with it so we have to go out and buy some allens. ohwell. LMK.

[covadsucks]

To adjust the velocity, turn down your reg pressure. Make sure you go slow and keep an eye on yer LP guage. As for the eye, I forgot that one, sorry. My timmy should be on route by now...if you have any other questions call Delta Paintball in Concord, CA 925-685-7141 ask for Zach or Big Johnny