emag run away

[Arson51]

using 3.2 version software
every time i reach the emags set bps cap it will stick to full auto at that speed. for an example if the bps cap is set on 15 and i fire at 15bps, it will stick on full auto at 15bps untill i hold the trigger down. what is wrong, and what can i do about it? thanks for your help!

[AnArchist_1944]

what is your software version?

[Arson51]

sorry i forgot to mention i added it on the first post

[BYERSMAG]

wow I would love to have an explanation for that, cause mine does the same thing when i cap the bps at 15. Whats your shot buffering set at? I thought mine was being caused by my solenoid thats on its deathbed! I'm waiting on a new solenoid to arrive so I can see if that has anything to do with my full auto issues...

[Z-man]

Is your sear pin touching the trigger AT ALL when you are in E-mode?

[Twistlock]

I notice they tend to do that when the battery starts to get low. In my mag anyways. Maybe your battery is getting weak. Just a thought.

TWISTLOCK

[athomas]

Have you reversed the wires on the solenoid yet? If not, then do that first. The polarity of the solenoid may be causing a magnetic fluctuation which in turn may be reactivating the hes switch.

[Arson51]

it happens with the gun degassed, and when gassed up. the sear pin cant be the issue. my battery is fully charged, well it was, but playing with the full auto has brought it down.

[Arson51]

wow I would love to have an explanation for that, cause mine does the same thing when i cap the bps at 15. Whats your shot buffering set at? I thought mine was being caused by my solenoid thats on its deathbed! I'm waiting on a new solenoid to arrive so I can see if that has anything to do with my full auto issues...

how does a noid die? death may too be at my noids door