Bolt problems

[DGBaller]

I am having a problem with my gun. It will shoot ok for a little while and then the bolt gets stuck foward just a little bit and I have to push it back. When the bolt gets stuck foward when I pull the trigger nothing happens and the trigger doesn't rea;;y have any pressure behind it. If you guys could help it would be great. Thanks!!!!!!!!!!

[alooney11]

first make sure you have more than 650 psi going into the gun.

Then put some oil in the asa if you have not already done that.
Make sure your grip frame screw wasnt tightened by the hulk.

Gas up..shoot until it sticks.dont push it back.

Slowly tighten the field strip screw until the valve resets. Happy Holidays

The new aluminum bodies flex and if there is uneven torque you get stick.

[athomas]

The bolt sticking forward is usually a sign of bolt stick caused by a powertube carrier that is too tight. Use a carrier that is one size larger and you should be fine. You may want to remove the shims while changing carriers though. This will remove the potential for leaking due to changes in where the o-ring sits in relation to the vent hole.