warp body/hopper?

[[NA]WARLORD]

Thats an old pick of the warp feed, agd still has elbow offered at their site, but they dont have anymore, i already checked. The only difference between AGD and PTP warp is the vibration sensor ( the part that triggers the warp to spin) is inside on AGD version, outside on PTP version. Also how you set your particular warp is up to you, you can cut hole thru revvy (which i recommend as it will keep revvy from falling of if you have a new style one- PRE-BE) or melt hopper, which does same thing only it takes longer and easier to screw up loader if your not clear on how to do it. Its all based on personnal preferance...

[PRO_Ski101]

OK,the more i try to figure out,the more i find out(THAT I HAVE NO CLUE).OK,how should I attach my warp feed to my warp feed body,and how should i keep my hopper from falling off my warp??THANKS any help will be GREATLY appreciated.PEACE

[[NA]WARLORD]

There are 2 ways to attach revvy to warp, 1.) drill hole, cheaper and 2.) There is a sleeve out on the market that goes around your revvy and into the warp, it costs around 10 dollars, unfortunatly i dont know where to get it, maybe somone else can help you with this. As for conectinng hose, if you mount warp on left side of mag, just run the hose to the bottom of powerfeed, if you mount warp to right side of mag, mount run hose under body and mount to same location but you will need the 90* adapter. By mounting on left and drilling out revvy, this will secure revvy to warp and give you a tighter package at the same time. When I get my warp, I will post a pic for you or you can go to Main forum, look for "Official Automag Pictures" thread and see the ones already done by others, if ya cant find the thread, do a search and punch in the thread title, that should take you right to it...

[PRO_Ski101]

HEY,thanks.that'll help alot.

[PRO_Ski101]

OK,when ur talking bout mounting warp on left/right side.R u talkin bout on a warp feed body or what.cuz if u are it'll be perfect.ALSO,if i buy a warp from AGD online store,will it come wit wanna those hopper to warp adpators?

[[NA]WARLORD]

Yes, warp on left= warp powerfeed body left. No, they dont carry them anymore (90* adapter), they dont have anyone to manufacture it anymore, sorry.

[PRO_Ski101]

I would post this all at once but it comes to me at differnt times.ANYWHO,just to make sure.If i buy a warp left mainbody and a AGD warp feed from the AGD online store,i shouldn't have to buy anything else to hook my warp up?thats what i've collected from the replies.If i'm wrong,please correct me.

[[NA]WARLORD]

As long as you mount the warp on the left side of your gun, that should be all you need.

[PRO_Ski101]

Great.Peace