Stops to work in a 45 dgr tilt..

[OmniM]

Was practicing with ReBall yesterday and I experienced several problems.

First, the ReBall caused Lv10 to go nuts I think. Since ReBall is slight harder than regular Paintballs it kept pinching like 2-4 in a row before a clean shot were made...
So, with ReBall I need to set the Lv10 sensitivity to 0. But how.

Second thing is that when I tilt the X 45 dgr or more to the left it stoppes to work completly. How come?

And after training I saw that the TS went from 2000 to 555000+! ... is there sth terrible happening to the mainboard?

Thanx/ OmniM, Sweden

[OmniM]

no one?

[Potatoboy]

The hardness of the paint shouldn't have any effect on whether the Level 10 will stop on it.

If the paint is completely loaded and the level 10 is still resetting on it, check your ball detent, it may be interfering with the bolt.

As far as the marker not working when you tilt it, it's likely that your trigger needs some slight adjustment. Since the trigger has a little side to side play, try pusing it to it's extreme, on both the left and right side, and make sure that while it's at that extreme it will still fire when you pull the trigger.

If it does not, you need to make slight adjustments to the trigger magnet until it does so.

Occasionally the TS counter will go high for one reason or the other. It's nothing to really worry about.

Of course you can have the software updated which will also reset the TS counter. I believe AGD Europe is still updating software as well, but I am not 100% certain.

[WingMan13]

Just wondering...what kind of loader your using?

[OmniM]

Just wondering...what kind of loader your using?

Thanx for ya tips...

... Im using a modified HALO-loader...

[Joni]

I think that the good people at AO should know that Omni has lowered the velocity to 250 fps (since that's what reballs is supposed to be used at). I strongly suspuct that is what causes the problems. He is going to change to a lvl7 bolt instead, which should solve some of the problems

[OmniM]

.. and something else came up today ... shortstrokes.. in E-mode...

... how come?