Karta body & rail + 68 Classic w/intelli & 9v Revvy = ?

[veritas]

Hey guys and gals, I Was wondering if you could shed some light for me on some questions...

I have an otherwise stock PF-L 68 Classic with a non-wired in Intelliframe and a 5 year old 9v Revvy...I have never owned anything except a mag for the past 13 years...this is my second Mag and I have never had any chop issues using the 9v...I have also never used a center fed marker before...I'm not planning on changing the trigger pull or making anything electric, i like everything the way it is...I don't spray that much paint so i've never outshot the hopper before...

My questions are:

Is the Karta frame and rail combo offered on AGD's website compatible with the classic valve? Will it fit?

Will the intelliframe bolt up to the Karta rail?

I would plan on getting Rogue's feedneck for it but now that the marker is center-fed will I outshoot the 9v VL?

Is it more succetable to chops now that it's centerfed?

If so, without spending a lot of money, what is a better alternative to the hopper I have?

Is there a certain feedneck height I should get...does it matter?

I hear people mention the Retro Valve as a nice upgrade to the classic...can someone tell me the differences? Pros/Cons And whats a good price?

Would I have chop issues with the retro with the above setup? say, Karta frame/rail, intelliframe and a slightly better hopper than what i have...

I don't ever plan on going X-Valve or level 10...


Thanks in advance for all your help...


Vin C
NYC

[MonsterMag]

Is the Karta frame and rail combo offered on AGD's website compatible with the classic valve? Will it fit?
Yes

Will the intelliframe bolt up to the Karta rail?
Yes

I would plan on getting Rogue's feedneck for it but now that the marker is center-fed will I outshoot the 9v VL?
It will fit

Is it more succetable to chops now that it's centerfed?
No , less chops , and if you have lx its no prob

If so, without spending a lot of money, what is a better alternative to the hopper I have? Halo b , apachie , new revvy

Is there a certain feedneck height I should get...does it matter?
If you get the rouge feedneck you can use any loader , with it having a tight fit.

I hear people mention the Retro Valve as a nice upgrade to the classic...can someone tell me the differences? Pros/Cons And whats a good price?
Its better , newer , faster recharge rate I think.

Would I have chop issues with the retro with the above setup? say, Karta frame/rail, intelliframe and a slightly better hopper than what i have...
If you have lx again no prob

I don't ever plan on going X-Valve or level 10...

Get LX , its worth it , trust me. Its worth the money and you will never chop if its tuned. Best upgrade I bought for my emag


Thanks in advance for all your help...


Vin C
NYC

emagballa

[Little_Ho]

hi there
let me try,

1. The Body and rail should hold you Classic Valve, but you need a new Barrel with AutoCocker Thread.
2. Intelli should fit any Rail/Bodys maybe need a new Sear and Pin
3. If you go with the Classic valve i guess you will not outshoot the Revy. Its a valve question and how many cycles you can pull the trigger.
4. not sure but i dont think so
5. I never outshoot my 12V Revy with a RT Valve so if you decide to upgrade to a RT or X valve then you better go with the 12V Revy
6. I dont know due i use only Warpfee bodys so far.
7. The ReTro Valve is the same like the XValve but the RT is SS and the X is all Aluminum (lighter). Pros you need more paint and you need a better Loader. But like i said i never outshoot my 12V Revy. BTW the RT/X are faster they can handle up to 26shoots.
8. If you decide to get ReTro/RT/XValve then its better to get LvlX. But the X have it allready installed.

So far i can say. Please if someone got another idea or i did something wrong correct me.
If you look for spec between ReTro/RT/XValve then you can go Havoc

All infos you need, or go ZakVetter

Thats all i can say......

Hope thats helps a little bit.....

Little_Ho

[Rift]

The questions above have been answered pretty well the only thing i would add is that the Retro Valve and the X-valve are the same thing the only difference is that the X-valve is all aluminum, and comes in different colors. Both of these valves have the reactive trigger technology basically meaning that it takes lets say 2 pounds to pull the trigger and the return force will be 4 pounds (these are theoretical numbers of course). Do you have any perticulare reason why you do not wish to use the lvl 10?