I was just wondering if anybody has ever had any problems with the barrel converter? Is it possible for the bolt to hit the back of the converter if it's not lined up right? Thanks.
-
-
If it's not lined up right, sure the bolt could hit it. What is causing it to not line up?
-
Oh, I don't know if it's not lined up, I was just wondering. My gun is in the shop being built, so i'm nervous and a little paranoid that something is going to go wrong.Comment
-
i never had any problem with mine, nor did my friend who i sold it to.President Of the UW-Madison Badger Ballers
AO Feedback
1 of 35 SFL Emags VV02746
Silver Karta/Logic RT Winner:GOTM Most Bling for December VV04971
Sydarm SY00715
Nelspot (under restoration)
Comment
-
haven't had a problem with mine....just a bit of a whobble in the barrel, but nothing that really effects me.
Comment
-
yea those thigns are a dream i had one on my 68 to use my big shot lapco....i built a ule mag recently, and have since sold my 68 off....so my lapco still fits in my ule mainbody
I LOVE MAGS :hail: ...and hate low pressure output tanks....and :shooting: spyders
Comment
-
Ok, I just got my gun back and now I see what you mean by "a bit of a wobble". It's not that bad and doesn't effect the function.Comment
-
and the twist-lock mag barrels always wobble a bit anyway in my experience. can't blame doc for something that's built into the system...Brian Lojeck, [email protected]
Webmaster: http://www.WhatBrianThinksAboutLasVegas.com
Classic Automag #CF00455, ULE RT Pro #VV05456
FeedbackComment
-
A little trick I used to take out that wobble was to put a single strip of clear tape around the convertor and then put it in. In fact it was so snug, I had to screw it on a barrel and then use the barrel to slowly work it back in to position. There is NO play what so ever in it now.
Been working like a champ for the last year or so.Lvl X TKO Automag PF/HL, Intelliframe, a Simmons 30mm Red Dot and a J&J 12" Ceramic barrel.
Crossfire 68/4500
-------------------------------------
Die Hard Woods Player
Comment
-
I had some trouble fitting mine due to some foreign matter in my rt's body. No problems with the adapter itself. Mine is very tight. I feel it is worth while piece if you want to keep the classic look and want to up-grade to screw in barrels.Comment
-
I had no problems with mine at all while i owned it.Comment
-
Good thing to know, Severe. I'll have to remember that tape fix when I start rebuilding the wife's Mag.Comment
Comment