ult on/off stuck together

[FreakBaller12]

I can't seem to get my ult apart. It won't spin at all like it should. Should I try heating it up?
I dunno how to get this thing apart.

[Yabb0]

try taking the bolt out and gassing the gun up. make sure you have the on/off pointed at the ground or into a bowl with a rag in it to catch the parts. some times my on/off's get stuck and thats how i get them out. i like to modify my stuff alot so its a common thing for me

[FreakBaller12]

will that just knock the pin out?

[AnArchist_1944]

I think he means he cant get the ULT into two peices, I dont think he means its stuck in the valve.

maby try leaving the on/off soaking in a bit of WD-40 or even better Tri Flo but take the o-rings off first.

[Yabb0]

it wont knock the pin out it will remove everything including o rings stuck in there. and if hes talking about it out of the valve try some oil.

[FreakBaller12]

the on off is out of the valve, I cnat get it to untwist(even move) It's just stuck.

[usmc8892]

holding my ult in my hand now, i would secure the round section on the assembly in a padded vice, and then take an adjustable wrench very gently to the square end, it unscrews about 3/16 of an inch below the top of the square section, it's possible it is loctited. Just be gentle with it

[FreakBaller12]

Alright, I'll be experimenting with stuff today afterschool, hopefully I can get this sucker apart, Thanks guys.