pump mag spacer help

[space_weazel_45]

After much searching and conversation, i have found it quite difficult to find an original PT spacer for the AGD pump kit, and have had no luck with the spacers i have, so what i am going to do is make a spacer that is the correct size to fix my leak problem, so

What i need to Know is.....
how big is the original PT spacer that came with the kit exactly so i can turn one out, the exact measurement i need is its depth, .100-.220? some where in there it should be marked on the side of the spacer

Thank You

[Gunga]

PT spacers range from .215 - .245 in .005" increments. Which one you needs depends on your particular valve. However, the most commonly used size is .220.

[space_weazel_45]

no i need the specific one for the pump kit I have all the standard ones.
thanks though.

BTW sorry to the mods for having to move this i thought i was in the tech forum. thanks

[Muzikman]

My calibers read .190 on the stock pump kit spacer. It is a gold aluminum spacer, not like the normal brass AGD spacer.

[space_weazel_45]

Thank You Muzik
now to turn one out!