Tonight I was checking to make sure all is functioning and when I flipped it on, the on/off switch came off from the board. Is it possible to bypass the switch?
-
Gloss Black X-Mag | Matte Black ND FreeStyle | PPS PGP Stroker | CCM SV Pump -
Sound slike a job for Brad! BTW nice job on making sure that all is okay on the Emag. LOL, sorry, couldn't resist! :) -
as Recon said, you will have to send it in to get the board fixed, other wise you will have to remove the eye board and then have to use the yellow pin to turn it on/off. id suggest just getting it fixed instead of trying to mess with the electronics yourself.President Of the UW-Madison Badger Ballers
AO Feedback
1 of 35 SFL Emags VV02746
Silver Karta/Logic RT Winner:GOTM Most Bling for December VV04971
Sydarm SY00715
Nelspot (under restoration)
Comment
-
I can fix it for a small fee. There's no possible way to bypass it yourself without fixing the board. You'd need to solder on a new power lead to the board and remove the ACE if you wanted to do it that way, or you'd have to fix the board.
I have replacement ACE boards and if I can't fix the existing board, I'll be able to replace it completely.
PM me if interested. :)Comment
-
Well, I got worked around it by soldering the switch back onto the board saturday morning. I had then had the rest of the day to get it tourney legal.
I will keep ya'll in mind if I have to get the ACE board replaced, thanks for the responses.
Recon - I wanted to make sure all is well for the HRL meet this weekend, so I had to 'lock' it down to E, so technically there was nothing wrong with it until i 'flipped the switch'
Gloss Black X-Mag | Matte Black ND FreeStyle | PPS PGP Stroker | CCM SV PumpComment
Comment