Ult w/ emag

[B.A.M.]

Does a ult on an x valve work with e mag lowers. Also do you need the emag rail and sear to go with my rt ule or no? thx

[xballfan780]

The ult will work on emag , but slows down recharge rate and makes the gun shoot slower. When you get an x valve you have to use and emag on/of assembley

[B.A.M.]

k
can i just use my rail or will i have to use an emag one.

[xballfan780]

yours will work

[B.A.M.]

but would'nt you still need the sear an what about the wires i always see on the e'mag rail?

[xballfan780]

but would'nt you still need the sear an what about the wires i always see on the e'mag rail?

all the wires are on the emag frame , the sear comes of the rail with a anxel pin

[B.A.M.]

k got it

[TMAXXKING1]

good luck

good luck i know that vid will help you out alot .. alot of real good info on it ...