Make my Mag fire faster

[Pyroboy597]

Im simply wondering, what trigger mods can i use to make my trigger be able to fire faster. Im using a mini-mag, with a level 10, intelliframe, boomstick, 64 tank, and eVolution II hopper. Is ther another trigger out there that can be used on a mag that is electric (beside the piece of crap hypertrigger by centerflag), or are there any mods that can be put on an intelliframe?

If you know anything, just post away!

Thanks

[xballfan780]

http://www.zakvetter.com/Pages/Paintball/Automags/Rapid_Fire/how-to-rapidfire.html

[Eatem Alive]

get the ult (ultra light trigger) it helps alot. it's not so much a new trigger as it's a replacement for the on/off. you can find it at the online agd store.

[Little_Ho]

try a ULT you can get this in the Dealer section....

[Pyroboy597]

hey xballfan,

i have the level 10 and an intelliframe... im using a Java 64 4500psi tank, can you just buy a regulator for that?.. also do you know where i can get a cheap rt valve?

[xballfan780]

hey xballfan,

i have the level 10 and an intelliframe... im using a Java 64 4500psi tank, can you just buy a regulator for that?.. also do you know where i can get a cheap rt valve?

R-t mag
88ci 4500 psi Maxflo
Itelly Blade

You could prob find a r-t valve on ao
Yes you can try to buy the maxflo reg seperate and have it attached by a airsmith

[SpitFire1299]

R-t mag
88ci 4500 psi Maxflo
Itelly Blade

You could prob find a r-t valve on ao
Yes you can try to buy the maxflo reg seperate and have it attached by a airsmith

Sweet Spotting, Runaway, Rapid firing...

You need a ULT, Level 10, and Xvalve. I believe that Runaway is against the rules.

[Pyroboy597]

OK. How much does a reg cost and can guys at a Paintball Shop install it for me?... i know this is gonna sound retarded... but wat is AO ??? the store on www.airgun.com?

[SpitFire1299]

Airgun.com makes and sells the Automag. This is the Automags Organization which is sponsored by Airgun.com

If you want a GOOD regulator it will cost at least $90. The ANS GenX II one is real nice. If you buy one from a store you can ask them to install it for you and they might.. depends on the store. If you do it yourself, make sure you do it tight enough and have teflon tape.

[Rift]

If you are running a minimag vlave which is esentially a classic you wont be getting much bounce as the trigger is not very reactive. If you want to make it faster you can atempt to put a ULE Trigger in there, some people have been able to get it to work in a classic valve and some have not, or you can buy yourself a retro valve. Otherwise there isnt a whole lot you can do. Another thing you dont need to second reg a mag, the reg on the valve dose a fine enough job of regulating the pressure, adding another one could just starve the valve.

[BeaverEater]

Try a ULT and trigger stops. I have them in my classic and i could walk it.

[j.storm]

OK. How much does a reg cost and can guys at a Paintball Shop install it for me?... i know this is gonna sound retarded... but wat is AO ??? the store on www.airgun.com?

AO=Automags.org Where we all live

[SpitFire1299]

A... O... Lets Go!

[Andrew Cunje]

all i can say is input pressure input pressure input pressure

YARRRR

[Enemy]

rt vlave!! and logic and rougue have after market frames both with adjustable trigger stops.. check them out in the dealers section here!