i screwed up!!!

[kylemc]

i tried adjusting my lvl 10 carrier to the next largest carrier.05 and it leaked so i put the .00 back in and it leaked worse. so i read the lvl 10 installation guide and followed all the instructions and did what they said but still leaked so at 11:00 pm last night and 0 psi i gave up do you have any suggestions this is really making me mad

[Tunaman]

grab another oring and try it again. These oring sizes are REALLY small this batch. Any smaller and AGD is going to have to make us 9 more carriers going smaller than 0! Let me know if you cant get it going and I'll fix it.

[kylemc]

i have already gone through all the troubleshooting and replaced the o-ring.
thanks for caring tuna and i'll keep trying.
by the way tuna's service is great don't hesitate to deal with him great guy

[P8ntballr4life]

o-ring

Tuna's still right.
The o-ring you picked out was either the same size or smaller than the last one you had in. You will need to find a bigger o-ring of the same type. You will not be able to notice the difference just by looking at it though. You will have to test it by installing it.