AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026.
Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
ok i have a crossfire 68 ci 3000psi and i hav had it for a pretty long time and im just noticing my shots per fill are goin down and down. im only getting like 300 shots with a fill up to 3300 psi. i dont know what is goin on. plz help!
My girlfriend rides a moped. How cool is that??!!
Good Traders list : RogueFactor, Langrage, ttoad4000t Old Mag Man, HungSolo, Shocker1050, pumpamatic, hitech, Mossman, Jonno06, Rooster, Grimm1013 |||
Bad Traders : INFINITYMAG - where is my money!?! he has been banned and now changed to THEBIGUY
First I need to know what barrel you are using, how hot out it is, what you initial velocity reading was, what paint you are using, and the bore size of your barrel. Also the barrel length. These are ALL factors in how many shots you are going to get. In a 68 ci 3k crossfire, I would expect (in my setup, weather, and paintballs) to get around 1100 shots. I get 700-800 in my 45ci. 800 was on a 65 degree day, I almost pissed myself when I realized how many shots I was getting, compared to what I was expecting (500 shots).
You also need to rememeber that your tank will be warm for about 30 minutes. If you fill, gas-up and chrono within that time, you will eventually be shooting +10 fps or more (I dont really know how much, but I went +20fps when it was 70 degrees in the morning, and 82 in the afternoon) than your initial velocity, which lowers the amount of shots you get.
Seems to me you are getting a rediculously low amount of shots and need to check up on the paint you are using (its possible u are using .690 bore paint with .684 barrels, this is not good). If this doesnt help, get your gun checked, something is wrong; 600 shots out of 68ci 3k is crazy.
You want inneffiecent guns...try the stock Matrix...this thing gets 1250 shots for a 88ci 4500psi tank. On a Mag, I would get MORE than that with a 88ci 3000psi tank.
MM19223 -=Minimag=-
[Level-10]&[ULT]
-Self Polished Body
-Intelliframe nickel
-Lapco SS 12 inch
-KAPP Chrome gas thru-grip
-32* Flame Drop Chrome
-Black Macro
-47ci 3000psi Crossfire tank My minimag-link working
Thats something ive always been curious about. Mags have a fixed dump chamber correct? For some reason I seem to get less shots dryfiring then I do when shooting paint, but you would think that wouldent happen, any explanation?
Quote of the year: "Reading blwos"
As little as 10 cents a day and you can buy my family out of slavery... Hurry before its too late!
i've noticed the same thing was kaiser, but i have no clue why either
Lapco barrels are the most efficient, and are very accurate also. So would my 10" BOA snakebite with porting at the last 2" be more efficient then a minimag stock barrel? The BOA has an effective unported length of 7" while the minimag has 8" of unported length.
My girlfriend rides a moped. How cool is that??!!
Good Traders list : RogueFactor, Langrage, ttoad4000t Old Mag Man, HungSolo, Shocker1050, pumpamatic, hitech, Mossman, Jonno06, Rooster, Grimm1013 |||
Bad Traders : INFINITYMAG - where is my money!?! he has been banned and now changed to THEBIGUY
11 inches of unported is ideal. Lapco = 11.5 inches with .5 inches of porting. So that works out pretty good; not too many barrels are this efficient. I have a lapco combined with a 47ci 3k crossfire tank and on a good day I get 800 shots. Normal day I get 725 +/- 25.
MM19223 -=Minimag=-
[Level-10]&[ULT]
-Self Polished Body
-Intelliframe nickel
-Lapco SS 12 inch
-KAPP Chrome gas thru-grip
-32* Flame Drop Chrome
-Black Macro
-47ci 3000psi Crossfire tank My minimag-link working
Comment