ULT and Trigger Rod Length

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • undescriptive
    Battered and Bruised
    • Apr 2004
    • 279
    #1

    ULT and Trigger Rod Length

    Hi...

    just got my ULT today, and I have installed it fine...

    however, I have shimmed the ULT to 5 shims and now my trigger rod is touching (almost - a hairs width away) the trigger on my intelliframe.

    would it be OK to make the rod a little shorter as at the moment, if I even rest my finger on the trigger it hisses at me....

    but other than that, I can shoot a good 6bps faster with the ULT in (on my RT) with no sweetspotting (a good thing! ) but it's got as much reactivity as the stock on/off running from a preset 800-850 tank...


    and I'm about to embark on installing the ULT into my other halfs Classic/AIR (I ordered 4 extra LVL10 shims for hers and I'm starting the tuning @ 4 Lvl10 and 2 ULT shims and we'll see from there!)
    Tags: None
    • AnArchist_1944
      Sex-E-Mag
      • Sep 2003
      • 360
      #2
      Rule #1: Never Ajust Trigger Rod.

      unless you have the equiptment handy to measure it back to exactly where it was oh and if you ajust it and something breaks down AGD wont warentee it.
      My Gun:
      Black Karta
      Blue Blade Trigger
      E-Mag Lowers 3.2
      X-Valve
      Black Dye Ultralite
      Two Blue Kila V2's
      Pics Coming Soon

      :hail: AGD :hail:
      FeedBack

        Comment

        • Titansu
          • Jan 2002
          • 711
          #3
          Originally posted by undescriptive
          4 Lvl10 and 2 ULT shims

          Shouldn't it be the other way around?? I guess it depends on your setup, but WOW!! 4 LVL 10 shims!

          Check BlackVCG's stick on the Tech Forum:

          Tolerance Specifications - E-Mag - RT-Pro - Minimag/Automag - Level 10

          E-Mag:

          On/Off pin: .712" w/ brass top and double o-ring top.
          .725" w/ aluminum top and single o-ring top.

          Trigger Rod: 2.125"

          Solenoid Plunger Rod: 3.005"

          RT-Pro:

          On/Off Pin: .765"

          Trigger Rod: 1.985"

          Retro Valve/X-Valve/Classic RT:

          On/Off Pin: .750"

          Automag Classic/Minimag:

          On/Off Pin: .750"

          Trigger Rod: 1.985"

          Level 10:

          Bolt stem: 2.010"
          FEEDBACK
          PBNation.com
          Automags.org
          PBReview.com

            Comment

            • undescriptive
              Battered and Bruised
              • Apr 2004
              • 279
              #4
              I know you _shouldn't_ change the trigger rod length, but when putting 5 ULT shims in my RT it moves the trigger rod right onto the back of the trigger, making it hiss - EVEN if the SAFTEY is on!

              I have a set of calipers if I need to change the rod back - but I was only going to back it in by about 1/16" just so there is a little bit of play in it...

                Comment

                • trains are bad
                  Registered User
                  • Oct 2003
                  • 1751
                  #5
                  I suggest you forget everything people say about adjusting the trigger rod, and just adjust it so that there is a bit of slack between it and the trigger, with whatever setup you have. I remember having to adjust my trigger rod when I went back and forth between the ULT and RT. Really, as long as there is slack it's no big deal.
                  TRB's feedback

                    Comment

                    • undescriptive
                      Battered and Bruised
                      • Apr 2004
                      • 279
                      #6
                      Cheers trains :)

                      just what I needed to hear

                      my mag is nearly complete....

                      just need a Karta and a RPG Frame now! (and prehaps a Lvl 10 - but I couldn't be arsed to set it up!)

                        Comment

                        • robb2269
                          Registered User
                          • Dec 2003
                          • 63
                          #7
                          do you have a x-valve or rt valve? because the ult is not going to work as well in a classic or minnimag valve. just asking. i think it can be done but not as reliable.
                          ROBB2269 :shooting:
                          Minimag rail, X-Valve black, ULE CF body black, ULT trigger, ULE Intelliframe, Shochtech mini drop w/on off, Dye Ultra light barrel kit, Evo II z-board smoke.
                          :cheers:
                          Titenium Karnivor, Dye Ultra kit, Evo II z-board

                            Comment

                            • undescriptive
                              Battered and Bruised
                              • Apr 2004
                              • 279
                              #8
                              got an RT and Classic....

                              Got a ULT in both, the classic still short strokes a lot, but I think I just need more shims - got 13ULT in there @ the moment

                              oh and some trigger stops :P

                              however, I think part of it is to do with the fact that it isn't an AGD triggerframe, it's a PTP one....

                              as soon as I get an RPG Chimera, I'll move my I-Frame over to the classic.....

                                Comment

                                Previous template Next
                                Working...