level 10 (i think)

[mag88888]

i have a rt ule custom, x valve with level 10 and i also have the ult. when i put my hopper on i cant shoot, it worked before i put it on. i have to take the hopper off and start messing witht the bolt. like pushing it back and stuff. eventually it works but why is it doing this? should i just add a shim? could it be the ult? i have 7 shims in it now, i think.

[mag88888]

i forgot to say. the reason i cant just test different setups is because my apoc2k is screwed and im waiting for parts. im just wondering what people think befroe i get my tank back.

[Chronobreak]

i have a rt ule custom, x valve with level 10 and i also have the ult. when i put my hopper on i cant shoot, it worked before i put it on. i have to take the hopper off and start messing witht the bolt. like pushing it back and stuff. eventually it works but why is it doing this? should i just add a shim? could it be the ult? i have 7 shims in it now, i think.

7 shims seems alot for the ult...

how many shims in the lvlx? maybe add another or turn elcity up just a TAD

also been oiling it?

[Conversekidz]

Loosen the frame screw and field strip screw, over tighten can cause that problem.

[mag88888]

ill test this stuff when i get my tank back. thanks for all the advice though.

[WARPED1]

Maybe a piece on the hopper neck is hanging into the chamber and setting off the LX?

[mag88888]

thats a possibility. does anyone with a x boarded revolution have this problem? i doubt it though. ill just tune it more later.

[Enemy]

its a lvl 10 problem im pretty sure of it!! try removing then adding a shim maybe going one size bigger on the carrier! also check chrono speed not enough pressure from the vlave causes weird things!

[Mag Master 04]

oil the crap out of yur ULT and take a few shims out maybe... also make sure your carrior isnt too tight onyur LX

[Potatoboy]

Moving to tech forum.

[mag88888]

thanks for alll the advice. im getting air today so ill check it out. i took most shims out of the ult. i have 4 in now. ill adjust from there. also i am gonna try a bigger carrier and try differnt shim combos. ill also adjust the frame screw. thanks for all the help.