E-Mag Prob

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • AnArchist_1944
    Sex-E-Mag
    • Sep 2003
    • 360
    #1

    E-Mag Prob

    Well after about close to 100,000 shot outta my X-Valve it has developed a slow leak down the barrel now its not all the time for the most part there is no leak but lets say I play 2 games back to back then it starts leaking I can useuall fix this by turing my On/Off Slider ASA off then on but its really annoying because as soon as it starts I lose alot of velocity.

    and in another possibly related possibly unrelated issue some times when Iam dry firing my bolt will stick in a very far back position and my noid will still click but it wont cycle the only way to get it cycleing again is to push on the bolt with my finger and shoot thill the bolt comes forward a bit then it will start cycling again.

    Please help my team has the Canadian Nationals comming up in less than a week and Iam the all important snake runner and I need my gun to cycle reliably everytime.
    My Gun:
    Black Karta
    Blue Blade Trigger
    E-Mag Lowers 3.2
    X-Valve
    Black Dye Ultralite
    Two Blue Kila V2's
    Pics Coming Soon

    :hail: AGD :hail:
    FeedBack
    Tags: None
    • Ken
      Registered User
      • Oct 2003
      • 141
      #2
      Could it possibly be a worn in carrier o-ring for your level 10? If not, I remember talking to z-man and he said that some parts will wear after extreme use. I'd send him a PM if I were you.


      Goodluck,
      Ken
      E-mag, 3.2, Ule Body, freak

        Comment

        • Creative Mayhem
          AO's OFFICIAL CANUCK
          • Apr 2002
          • 3633
          #3
          The leaking my be your lvl10. Try lubing it up, if that doesn't work then you may need to drop one carrier size.



          Owner:Purple People Eater - AFTICA XMAG
          Data Drops Tunamart Havoc_Online TheMagSmith Deadlywind LoadSM5Graphics

            Comment

            • AnArchist_1944
              Sex-E-Mag
              • Sep 2003
              • 360
              #4
              i dont really wanna drop a carrier size this close to such a big turny cuz my LX is working so good right now and I tryed lubing it up. is there a tutorial or a pic to show how to get the carriers out? could it possibly be the shims in my LX?
              My Gun:
              Black Karta
              Blue Blade Trigger
              E-Mag Lowers 3.2
              X-Valve
              Black Dye Ultralite
              Two Blue Kila V2's
              Pics Coming Soon

              :hail: AGD :hail:
              FeedBack

                Comment

                • athomas
                  Of course it works-its AGD
                  • Jan 2002
                  • 8039
                  #5
                  Have you checked the tension on your bolt spring. Yours may be worn out, causing spring to be sluggish in the return of the bolt. Other than that, the bolt sticking requires a larger carrier size.

                  Have you removed the shims from your level 10 setup? As the sear tip and bolt wears, the bolt sits farther forward. This allows the vent hole to be exposed slightly causing leaking.
                  Except for the Automag in front, its usually the man behind the equipment that counts.

                    Comment

                    • AnArchist_1944
                      Sex-E-Mag
                      • Sep 2003
                      • 360
                      #6
                      wait so it might just be a problem with my LX shims? because I just replaced my Red spring with a brand new red spring.
                      My Gun:
                      Black Karta
                      Blue Blade Trigger
                      E-Mag Lowers 3.2
                      X-Valve
                      Black Dye Ultralite
                      Two Blue Kila V2's
                      Pics Coming Soon

                      :hail: AGD :hail:
                      FeedBack

                        Comment

                        • bunny5
                          lurking
                          • Jan 2005
                          • 1099
                          #7
                          Heres the Lvl 10 install video thread...

                          All LVL 10 Info Here - Automags.Org Online Forums
                          http://www.automags.org/forums/showthread.php?s=&threadid=40904
                          This is the forum for trouble shooting your Airgun Designs products, including the Automag, RT, E-Mag, and WarpFeed. Also a great place to ask technical questions about non AGD products. An Airsmith's homeroom!



                          at the bottom of the first post has the LVL10 install video. It might help you out a lil

                            Comment

                            • MindJob
                              #8
                              100k shots is about re-build time. It wouldnt hurt to get a parts kit, throw a few new orings in, and take it from there.

                              Once in a while my noid seems to stick. I lube up the on-off and it works fine.

                                Comment

                                • purple
                                  Registered User
                                  • Dec 2004
                                  • 177
                                  #9
                                  i'm thinking its lvlx leaking, and the bolt stick i think is from having a worn out/shredded bumper.

                                  try rebuilding more often than every 100,000 shots


                                  purple

                                    Comment

                                    Previous template Next
                                    Working...