Intelliframe

[phase II]

Just wondering about the side play on the Intelliframe is it the same as the after market triggers really bad or has AGD possibly shimmed or made the triggers a little wider at the pivot point to take up the side slop? I can work with the front to back play thats easy to reduce, I just dont want to have to come up with teflon shims or something like that. I ask this so I do not buy the frame and have the same issue I have now with the auto response frame I use now. I have modified the trigger so it only fires on the return of the trigger pull not twice like it was designed to do, thus giving me a very short and light pull. Anyways any help would be appreciated



thanks

[SpitFire1299]

What kind of mag do you have?

And where did you get that frame?

[BeaverEater]

The slop in an I-frame is relatively low. Some have it more than others, but thats just from wear and tear. Personally, I like a little side to side slop because i think its easier to walk then.

[SpitFire1299]

The side to side slop is about 1mm on my intelliframe. (From Left to Right)

[phase II]

I can deal with 1mm side to side... The one I have now has probably 3mm or so. You tend to pull to the side with too much slop. I would really like to see a roller trigger come out, but I am told there isnt enought room for the bearing? Maybe mill out the rail? I am sure there is a way. I really havent took a long hard look. I will post a pic of my mag soon as I take one. I also have a custom forgrip I made (clear acrylic) I am never happy with the stock I dare to be different :-)

I have a minimag that I have used for many years I bought it in 96/97 and have used it ever since. The funny thing is I have put one sear and still have the original bolt from the date when I made the trade. It has lasted me quite a while. The only thing I have changed over the years are the O-rings and spring pack to the HP one. I am looking at getting the ULE body and soon as i find a broken down mag from someone who knows nothing about fixing them I will buy it so I can trade in the valve for the xvalve. I want to keep my current valve.

I got the frame from a kid at a 24 hr game here in Washington st a few years ago. He was really unhappy with it's preformance so I traded him a carbon fiber frame and a trigger job for his frame. At the time I believe the frame was around 100.00 so I jumped on the deal cut the fiber frame installed a doubel trigger mod the trigger to sear polished a few things and we were both happy. Sorry I do not remember who was making them at the time.