X valve carrier stuck???

[Yabb0]

i jutst bought an X valve with level 10 from AGD and it got here. i put it in and it leaked so i started taking it apart to adjust the level 10 but it appears the carrier is stuck in the power tub. i took the tip off and ran air through it but its not comming out. anyone know how to fix this or having the same issue. i looked through the stickys but didnt see anything like this in there.

[Yabb0]

i got it out it was a spacer that was stuck in there.

[Dayspring]

To remove the carrier, remove the power tube tip and take your field strip screw. Thread it into the carrier and pull it out. The threads will tug on the oring and pull the carrier out.