Help please! I have created a unique problem I think. I ordered the ULE trigger for my tac-one. . Because of a prior problem and some miscommunication with the guy I talked to while ordering it I have managed to lose the tiny black o-ring inside of the Xvalve! It has fallen into the part of the valve closest to the bolt. I do not think this part of the valve comes apart. HOW can I possibly get that tiny thing out of there?!Can I possibly leave it in there and see if I air it up it will cause it to blow forward to the carrier where I can then remove it? Or, does that part of the valve- the silver end that holds the 0-ring carrier for the level 10 unscrew from the valve?
-
-
-
If you dropped the tiny black o-ring into the valve chamber, then you need to get it out. Remove all the internals from the powertube opening. The best way to get the o-ring out would be to stand the valve vertically (powertube down) and tap it against a solid surface. The jarring motion should bounce the o-ring around against the front face until it eventually hits the powertube opening and falls out.Except for the Automag in front, its usually the man behind the equipment that counts.Comment
Comment