ult setup

[cpt]

I have a ULT on a x-valve with intelli. 5 shims and a pretty nice trigger. I have heard guys getting to where they can walk it or it gets a little reactive. When I go to the 6 th shim it leaks and chuffs and the trigger can be very slow to rest. I can live with this but would like to get it close to my RT wheere I can make it rip if I want. Using a 800 preset. Both are set up with lvlX and intelli's. Any thoughts?

[Chronobreak]

if u want rt use the rt.

the ult doesnt worj the same

its one or the other.

most people cant walk it consitently fast

[Eatem Alive]

i had one setup that would only get reactive with my adjustable tank at about 950. my setup now reacts great with the 800 preset on it. it just depends on the marker i think.

[Wassupstranger67]

I have all my ULT shims and all my level 10 shims in my ULT trigger. I can walk it and get it to rapid fire, at 800 psi!!!!

[Automaggot68]

I have all my ULT shims and all my level 10 shims in my ULT trigger. I can walk it and get it to rapid fire, at 800 psi!!!!

I just did that, and my valve wont fit into my main body, as the on'off sticks out.
How'd you do it?

[Wassupstranger67]

I just did that, and my valve wont fit into my main body, as the on'off sticks out.
How'd you do it?

Its really close on mine!! I had to screw the on/off together really tight for it to fit and then play around with it a little to get it in the body. I can get it to rapid fire faster the my buddy RT.

[Beyondinsane101]

call me a mag newb (probably cause i am) but whats a shim?

[personman]

call me a mag newb (probably cause i am) but whats a shim?

It's a very thin metal ring used for adjusting level ten and the ULT.