Classic problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Commissar_Loki
    6-shootin SOB
    • Jul 2003
    • 438

    #1

    Classic problem

    Ok I have a bit of a dilemma. My valve on my mag rifle or my stabi is acting up. For some reason using my 4oz tank, after going through maybe a little more than 2 oz, I'm getting major shootdown, which is roughly 60 shots. Is that all I should get from a 4 oz is 60 shots? keep in mind thats firing about 1.5 shots a second. Any ideas will be helpful, thanks.


    -Butch
    Mango= Hero

    Moods mango creates:
    :clap: :tard: :rofl: :cuss: :dance: :rolleyes:
  • space_weazel_45
    Official AO Ninja (really)
    • Jul 2003
    • 870

    #2
    I would make cirtain that you are getting a good full fill, aslo check to see what the stab is set at. I seem to remember that i was able to get alteast 120+ shots off my 3.5oz.
    other than that at this point it to late for me to think of anything else.
    Gear
    RT Mag / Minimag / Pump Mag / Sydarm / ULT / Qloader / ELCD / RPG / 1989 Sterling / 2x F2 illustrator

    Feed Back Here
    AGD - "[/tom kaye shakes head in disbelief]"

    Comment

    • rb211
      Poodles suck!
      • Apr 2004
      • 438

      #3
      CO2 or nitro? If you are using CO2, what is the outside temperature where you are? If it's cold, you will not get as many shots from CO2. CO2 loses pressure as the temperature drops, hence less shots per fill.

      Comment

      • Commissar_Loki
        6-shootin SOB
        • Jul 2003
        • 438

        #4
        Yes it is CO2, and I filled it (working at a shop and all). It was 100% full, it was roughly 68* F in the building. Stabilizer is maxing out at an output of 750 PSI.
        Mango= Hero

        Moods mango creates:
        :clap: :tard: :rofl: :cuss: :dance: :rolleyes:

        Comment

        Working...