Spare Parts for X-Mag

[Beauty]

I want to purchase O-rings, but wasn't sure if I should get this
http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=7& categoryID=16

Is there anything else I should get?

Sometimes in M mode is seems to fire full auto, why would it do that?

[White_Noise]

that link is messed up.

is it in mechanical mode(electronics turned off) or in hybrid mode? if its hybrid mode, it almost always has bounce and spurts of almost full auto fire.

[Beauty]

Click here for the link
Sorry about that. What other items should I pick up while I go on a shopping spree?

It does it in M mode. I also have an RT Classic and it doesn't do that.

[temilotzin]

If you are using an adjustible air aystem try turning down the pressure to around 800psi and it should stop going full auto on you. Otherwise check that your on/off pin is the right length.

Temilotzin
black x-mag
RTed minimag

[Dayspring]

But the question is, are the electronics on or not?

Click here for the link
Sorry about that. What other items should I pick up while I go on a shopping spree?

It does it in M mode. I also have an RT Classic and it doesn't do that.

[chairman_mao]

I believe this is the parts kit you want. The one you linked is for a classic valve. I'm not sure the exact difference but there is a difference. As for the ful auto issue I'm no where near an expert but usually if it's not the electronics it's the on/off pin length. Is is possible that it is worn or maybe broken? Just my thoughts.

[Beauty]

No, the electronics are not on. It is turned off. I switch it to M mode.

[Beauty]

Maybe I will order a new on/off assembly also, just so I know it's not or is that. Maybe I will order two of these kits I also have an RT Classic.

[Enemy]

No, the electronics are not on. It is turned off. I switch it to M mode.

if the electronics are on ie you go from e mode straight to m mode without touching anything else that is hybrid!! the electronic activation without trigger stops allowing the movement of the trigger rod to kick the trigger back out!! there is no electronic cutt off between emode and m mode!

[Beauty]

I am going to send my X-Mag to BlackVCG, so he can flash it, tune it up and adjust the trigger for me.

[stop whining buy a mag]

Smart choice. It is most likely your on/off pin that is making your Mechanical mode a little more bouncy than it should be. You should be able to bounce a few shots from it, but not go full auto for more than a second.

BlackVCG knows what he's doing.

[Beauty]

I probably won't have it for this weekend, but I will still have my RT Classic to play with. Thanks everyone.