New DYE frame help...

[Commissar_Loki]

Ok, just got one of my DYE frames and I'm curious if there is something wrong. The sear originally kept getting stuck, so i remedied that but just pulling the trigger and fidgeting with the sear, now (I'm not complaining), the trigger is HEAVY but crisp. I love it, but it just feels like something may be wrong, any ideas?


-Butch

[calcan311]

Wrong like how? I have noticed that the dye double trigger hits the bottom of the trigger guard, with a ult trigger sometimes it won't push the on/off pin in all the way. If this is the case you can remove the trigger and grind off some of the back side of the trigger.

[alooney11]

The dye frames are not made to AGD standards(so I have heard) you should be able to slide a credit card between the trigger rod and trigger.

[Tunaman]

make sure the grip screws are not hitting the sear.

[Commissar_Loki]

All fixed, talked to Tato, and just had to shorten the pin against the trigge, apparantly DYE's standards aren't as high as AGD's, so I had to adjust things a bit. Runs pretty good now. Thanks!


-Butch