SpecialOps Paintball Longbow

[WSPAINTBALL]

http://www.specialopspaintball.com/articles/specops_longbow.asp

"Currently, the Longbow Sniper Kit is available only for the Airgun Designs Tac-one (newer versions,) eMag (with standard rail and body,) and RT Pro (current models) -- and the Longbow magazine itself works only with center feed configurations."

Now to the Question:

I have a classic mag and I was wondering if I could take all the internals out, put them in a RT body and rail so I could use this Longbow Kit. Is it possible to interchange the internals of classics and RT's? Is there a centerfeed RT mag? Are there any other problems with putting this onto a classic mag that I'm not seeing? Any help would be appreciated.

Thanks

[Duzzy]

I think all you should need is a ULE Body and a RT Rail. I do not know for sure though. The valve or the valve casing should have very little to do with it.

[space_weazel_45]

[BeaverEater]

the mag only holds 21 paintballs, hope to see you on the speedball fields

[WSPAINTBALL]

So, I just need a ULE centerfeed body and an RT pro rail, you think. Classic mag parts will fit in a ULE body and a RT pro rail? Will I need a new pin and sear?

[Duzzy]

You will need a new sear and pin but that should be it other than the RT rail and the ULE body.

[Alpha]

Paintballs aren't accurate enough for a scope. Not even when shot out of a mag. Sure scopes are excellent for usign them as a monocular to see down the field, but when you have a 24x scope crosshair lined up against some guy's face 150 feet away, and you shoot at him, chances re you're just going to hit the tree next to him.

The TAC One already coutners the problem of the hopper being in teh way of your sight by using two side picatinny rails.

Teh fact is, unles you know how to walk on air, and turn invisible, or are playing against idiots, you're not going to come close enough to effectively use the scope. Well you can, but for that matter you can just aim down your barrel. Work on your aim and get nitro, it will help.

I'm not feeling the uber long barrel either.

Just my two cents, but whatever floats your boat man.

EDIT: To answer your question, it appears that you just need a body with the 3 holes for a sight rail, and a TAC-ONE or ULE CF body.

[eMpTy68]

Is the Tac One Rail only available from AGD for purchace.

[eMpTy68]

Found my own answer.