just got the xvalve, should i oil it before its first use?
-
-
Yes.
Use K-C if you can. Best oil that I have found. -
just put a couple of drops in the asa and dry fire right?Comment
-
yup, make sure you don't have the barrel on though - it will get oily....
I usually pull out the on/off and oil that too and pop a couple of drops down the powertube as well (to make sure it all well oiled) the fire 20-50 shots
and let it break in a little!
Comment
-
thx alot guys, love this forum. lots of helpful pplComment
-
do you guys put any oil on the bolt stem if thats what its called... the thing the bolt slides back and forth on.Comment
-
I do..
usually a couple of drops - it helps the PT O-ring a bit and prevents bolt stickComment
-
Help
i got a huge problem. i have an rt pro with all the ule ups and the x valve. the is problem just happened with out warning so here it is.
one day i went to gas up my mag and i started firiing and i mean like automatic at maybe 17bps and the only way do stop it was to degas the gun. so my local store operator took the valve apart and oiled up lots of stuff and its still doing it so im gona send it in but i was wondering if u could help b4 i send it.IM LISDEXIC :tard:
me-> :shooting: ---- :dance:<-- ur best friend u--> :cry:
everybody else in the world :cheers:Comment
-
It could be your trigger or sear? it might be stuck after the first pull and it keeps on firing. id check that because i dont think the valve can fire by itself. hope that sheds some light for youComment
-
brain.68 do you have a ULT?
mine did that with ULT it needed more shims.1- 68 automag (CF 351XX) ULE, ULT, lvl 10
2- 68 automag (CF 287XX) ANS bolt and on/off
.:FRED:.Comment
-
well i just took it out back and it was doing the full auto thing a gain and i was pulling the trigger and then i got it to stop. So i started putting one ball in at a time and it would shoot once. or even a few times in a row (when i pulled the trigger) but it seems like the sear didnt catch . cause i just pushed on the lv 10 and it would click into place and the it would shoot correctly untill i had to push on it again.IM LISDEXIC :tard:
me-> :shooting: ---- :dance:<-- ur best friend u--> :cry:
everybody else in the world :cheers:Comment
-
the pressure in my tank was down to 1000 psi when it stopped the auto thingIM LISDEXIC :tard:
me-> :shooting: ---- :dance:<-- ur best friend u--> :cry:
everybody else in the world :cheers:Comment
-
post away but i gota go to work ill be home in 3 hrsIM LISDEXIC :tard:
me-> :shooting: ---- :dance:<-- ur best friend u--> :cry:
everybody else in the world :cheers:Comment
-
should i lube it before i attempt to tune it? if so should i put some in the inlet, powertube and on/off?Comment
Comment