Classic Mag probs...

[NewMagMan21]

Well guys... I got my Logic Frame and played with it for the first time this weekend... It worked AWSOME *Ding* ... anyway when I was playing (I think this happend twice..) my Sear or trigger pin...whatever... it would go back as I pulled the trigger but would not come back forward...Resulting in me having to un/re gas my gun to get it back forward...I may have been able to pull my trigger back but my trigger stop wouldn't let me... In the past I have had on/off problems where the pin would be stuck sticking out resulting in my taking the rail off, pushing it back in and putting my gun back together...

What should I do ...? ...I honestly dont know what to do .. when the pin of my on/ off is sticking out I have experienced chops with my LVL 10 but that my just be the setup...

Overall:
*The pin behind my trigger wont come forward...I cant repull the trigger becaus off my stop
*I think its the on/off having probs..but I really dont know..
*I've had past probs with the on/off
*Dont know if that affects my LVL 10
Help me out

[personman]

Next time that happens try pushing the bolt back with your finger (in the breech)
Try adding a shim to the LX?

[NewMagMan21]

Sorry for the badly written post above..
Its not the bolt that's having problems... Its the trigger pin or whatever you want to call it... It wont reset after I pull it back....

The bolt's problems I have figured out...

Theres been something wrong(I dont know if others have had this prob) with the on/off... the pin will stick out of it making impossible to take out my entire valve without fully taking the gun apart...I dont know if this is common but it is an inconviniece (<dont know how to spell it) but if there is a way to make that stop it would be nice.. and would it be a problem with my on/off that creates the problem with my trigger?

[personman]

Well, usually the problem you're talking about is associated with the bolt not reseting all the way. Could be caused by short stroking or a level 10 needing adjustments.
Usually you can just stick your finger in the breech and push back on the bolt and your trigger will be back to normal.

Oh wait, I guess I didn't read all of your post. It's most likely your trigger stop if the gun was working fine prior to the installing of the frame. Try adjusting them out. Mags arent really designed to have trigger stops

You should still be able to fix it without regassing up the gun by pushing back on the bolt though (just for future reference)

[NewMagMan21]

ok thanx I'll try it next time I have the prob